Products

All categories



Contact Us

0519-87693876

8:30~11:30 / 13:00~17:00

Qiangbu Village, Nandu Town, Liyang City, Jiangsu Province, China

You are located : Home

/

Paint series

/

Net flavour resin

1/1

Number of views:

1001

Net flavour resin

PU clean, matte finish, primer

Retail price

0.0

元

Market price

0.0

元

Number of views:

1001

Products Categiry:Polyol Series
Keywords:UV light curing new material series,Reactive diluent
Product description:Jiangsu Kailin Ruiyang Chemical Co., Ltd. was founded in 2001, the headquarters is located in Liyang City, Jiangsu Province, south of the town of strong town. Is a set of polyol series, UV light curing series, water-based polyurethane series and the new resin

Back Contact Us

Quantity

-

+



1

Description

Purpose

PU clean, matte finish, primer

Physicochemical property

1. Check the reaction kettle. Clean and clean.

2. Put A material into the reactor. Close the backflow valve.

3. Began to heat up, open stir around 80 ℃, reflux after turning down the heat oil valve, open the backflow preventer. Slowly up to 210 ℃ reflux heat preservation after 1.5 hours. Cool for B materials, materials out of B, reflux heat preservation after 1 hour, again with 10 ℃ / h temperature to 210 ℃, heat preservation and esterification.

4.Began sampling temperature to 210 ℃ for one hour. Measure the value of viscosity. The viscosity is measured in the previous one hour and the latter half hour. Late to regular sampling, testing viscosity, acid value of qualified, temperature 200 ℃ or so began to turn

5.Prepare the C material ahead of the transfer. When turning the dilute kettle temperature control under 110 ℃. Transfer the remaining C material into the reactor, stirring for about 20 minutes and then add to the dilute cauldron

6.After 1 hour stirring, the sample is adjusted to the viscosity, and when the viscosity is adjusted to the qualified, filter packaging.

Transport storage

The products should be kept in a dry, cool and ventilated place. Prevent sunlight from direct irradiation, and should isolate fire source, away from heat source.